Looking for a reversing camera, mine is misty.
My camera has the part no: ex53-19g490-ae.
Not sure if any other part no will work
ex53-19g490-ae
-
- Posts: 3
- Joined: Sun Mar 03, 2024 12:00 am
Yes, I've taken the camera out the car and tried everything to clear it. It's better but not as clear as I would like.
-
- Posts: 2216
- Joined: Sat Apr 15, 2017 8:37 pm
The answer is yes and no..
In general cameras from other JLR models are not compatible even though they fit. There are 2 pin configurations and for each vehicle the software is different. The software changes the angle, width, direction and even the overlay lines, so it my partially work but not correctly.
That said if you find a camera with the exact same codes and software version, it’s a swap, so you can hunt on eBay and pick up a new one for less, which is what I did.
In general cameras from other JLR models are not compatible even though they fit. There are 2 pin configurations and for each vehicle the software is different. The software changes the angle, width, direction and even the overlay lines, so it my partially work but not correctly.
That said if you find a camera with the exact same codes and software version, it’s a swap, so you can hunt on eBay and pick up a new one for less, which is what I did.
2014 MY 3.0 V6S Roadster
Subtle enhancements to create the car I wanted from SVR nose cone, 400 series side skirts & customised 'design' rear bumper, to heated SVR steering wheel and more
Subtle enhancements to create the car I wanted from SVR nose cone, 400 series side skirts & customised 'design' rear bumper, to heated SVR steering wheel and more
-
- Posts: 3
- Joined: Sun Mar 03, 2024 12:00 am
So my camera is ex-53-19g490-ae. I've found one that is gx-53-19g490-ae, would be good to know what the digits relate to.