MY21 Front grille badge swap to 2023 black version.

[barrycraig]

Hi Barry, is the badge you fitted a 100mm black/silver one? If so, can I ask where you sourced it from? Drawing a blank in my own search for one. TIA / Jim

Hi Jim,

Apologies for the late response. The badgeI fitted was a 100mm matte black with the part number "T2R84501" I had to contact my local dealer to order it as I couldnt find one anywhere else.

Edit: having done a new search it seems that Britcar now have the badge stocked so you can do it without going through the dealer if you prefer: https://britcar.com/product.php/1074050 ... rad_grille

[barrycraig]

Hi Barry,
thank you for the great write up. I have just "upgraded" the front growler to an all-black 100mm one.
The front bumper or even the radiator cover need not be removed.
The way i did it was to carefully remove the outer bezel [where jaguar is stamped].
This gives access to the main part of the badge, which has an inward chamfer to it.
The tabs are located in the 000, 120 & 240 deg position [clock face i=12, midway between 4&5 and 7&8].
There is enough room to push the tab down following the chamfer - i used metal shirt collar stiffeners, and once released it just pops out.

Save your fingers next time......

Hi David, this is interesting to read as the badge I removed and the one I replaced it with are all made from a single piece of plastic, the "Jaguar" outer bezel is not separate like it is on the pre-facelift models. Did you do the swap on a MY20 or newer?

[DavidP]

Hi Barry,

My wagon is a MY21 facelift... I checked with the supplier [Hermann in Germany] that the part was for the new version, which was confirmed.

The one i have is splitable into 3, chrome bezel, red insert with black surround fused on and the growler head held by a single screw.

Its identical to the all-black that i got, using your part number. The all-black also splits into 3 thats how i worked out how to remove without all the aggro that you went through [also my fingers didnt fit that well!!].

I have added the pictures showing the process...

Cheers
David

EDIT - the pictures have loaded in reverse order, so start at the bottom and work upwards!!!

[barrycraig]

Hi Barry,

My wagon is a MY21 facelift... I checked with the supplier [Hermann in Germany] that the part was for the new version, which was confirmed.

The one i have is splitable into 3, chrome bezel, red insert with black surround fused on and the growler head held by a single screw.

Its identical to the all-black that i got, using your part number. The all-black also splits into 3 thats how i worked out how to remove without all the aggro that you went through [also my fingers didnt fit that well!!].

I have added the pictures showing the process...

Cheers
David

EDIT - the pictures have loaded in reverse order, so start at the bottom and work upwards!!!

Wow, I cant believe I missed that! Thanks so much for the photographs.